Repair Testers for Electronic Unit Injectors


 


1. Product Functions
The EUI repair tester consists of a mechanical cam box with EUI test adapter kits plus EUI model specified adapter kits, and an electronic controller. The cam box will be installed on a standard high pressure pump test bench. The EUI being tested will be installed in the cam box. The electronic controller provides the synchronous signal to drive the EUI solenoid. The EUI fuel injection quantities can be checked at given speeds and loads to judge the quality of the tested EUI.

2. Design Features
A silicon oil torsional damper is installed on the driving end of the cam shaft to reduce the pulsational unevenness of the cam shaft due to fuel injection.

A speed sensor is mounted on the cam box. Therefore, the driving signal is synchronous with cam shaft without the need for external speed sensor.

Modulated driving signal to ensure the safety of EUP solenoid.

The start of injection (SOI) angle and pulse width of solenoid driving signal are user adjustable.


Short circuit protection for the output circuitry of the solenoid driving signal

3. Product Models

The standard cam box is designed to be stalled on a Bosch 815 pump type test bench.

The installation height of the EUP cam box (from the cam center to the top surface of the test bench) is 125mm.

The cam box may be customized for special required installation height.

Product Model

Name

Matching EUPs

 

Date of Start of Production

CB-1000

Cam BoxAssembly

 

Feb 1, 2008

EU-1000

EUI/EUP Controller

 

Feb 1, 2008

 

EUI Adapter Kits

 

Feb 1, 2008

 

EUI     Model Specified

Adapting Kits

DDC S60 N2, S60 N3 Cummins M11, N14

Caterpillar  3406E, 3176, C12, C13, C15

Bosch PDE30-PDE90

Delphi A1, E1, E3

Upon Market Needs

CB-2000

Heavy-Duty    Cam    Box Assembly

 

April 1, 2008

EU-1000

EUI/EUP Controller

 

Feb 1, 2008

 

EUI Adapter Kits

 

April1, 2008

 

EUI     Model     Specified Adapting Kits

Caterpillar 35003600

Upon    Market Needs

CB-3000

Light-Duty Cam Box Assembly

 

April 1, 2008

EU-1000

EUI/EUP Controller

 

Feb 1, 2008

 

EUI Adapter Kits

 

April 1, 2008

 

EUI     Model     Specified Adapting Kits

  Volkswagen

Upon    Market Needs

 
 
1.Diesel Fuel Injection Pump Test Bench

2.Tools for test bench

3.PS-400A fuel injection tester

4.Repair Testers for Electronic In-Line Pumps and VE Pumps

5.Repair Testers for Common Rail Systems (CR)

6.Repair Testers for Electronic Unit Pumps(EUPs) and  Electronic Unit Injectors(EUIs)  

                         Hubei FOTMA Machinery Co Copyright©2007