Views:1 Author:Site Editor Publish Time: 2021-04-19 Origin:Site
The GTB-2000 governor test bench is developed by our company's engineering and technical personnel with more than ten years of governor maintenance experience. Its excellent working performance, compact structure and low price will be your inspection, detection and adjustment of governor performance. One of the platforms.
The GTB-2000 governor test stand is a governor test equipment that facilitates the testing of the governor and the precise correction of the governor parameters on the prime mover away from the engine or turbine. And can test:
Woodward company. UG-8, UG-32, UG-40, 3161, PG (with standard base and drive shaft), PG-EG, EGB 200, 300, P G200\300\500, PGA, SG, PSG, EGB-2, EGB-58, LSG-10, PG-PH, EG-3, EG-10, TG-13 type governors.
non-Woodward companies: EUROPA, RHD6, TY111, TY555 type governors and actuators . Auxiliary devices are required to test the non-standard governor base and output shaft governor (actuator) produced by Woodward Company and other models or other non-listed governors and actuators produced by other companies.
The governor test bench is not an engine or turbine, and users cannot expect the governor test bench to replace the turbine or engine that ultimately determines governor performance. The reason is that any governor test bench cannot provide the same driving torque, driving torque, coupling method, turbocharging effect, acceleration and deceleration effect, connecting rod group control characteristics, etc. as the engine or turbine. Therefore, it is normal that the performance of the same governor mounted on the engine or turbine and the test bench may differ.
However, the governor test stand can provide a quick and convenient method to test and adjust the governor as the final device in the engine or turbine. The user of the governor test stand can have a certain amount of time on the test stand to carefully and completely test the variable parameters such as pressure, speed, stop, load limit and speed adjustment before the governor is installed on the engine or turbine , Adjust or set. Practice has proved that in most cases, the governor set on the test bench according to the governor factory parameters can be installed on the engine or turbine to obtain satisfactory results.