News
You are here: Home » News » Fuel Injection System News

Fuel Injection System News

  • Introduction of valve components
    2020-08-18

    Introduction of valve componentsThe valve assembly is composed of several thyristors and their triggering, protection, pressure equalization and valve reactors. A thyristor valve body suitable for high-pressure solid composite switch devices. It adopts a vertical structure and consists of a left and

  • CRD-100 Injector Diagnoser
    2020-08-14

    CRD-100 Injector Diagnoser

  • CRM-200 Common Rail Injector Measurement System
    2020-08-10

    Features l Integrated measurement system with full functioned PC. l PC based control software n User friendly intuitive interface to direct the measurement procedure step-by-step n Provides the correct thickness of calibration shims to avoid the confused calculation by user n Build-in database

  • Case study of A failed CAT C7 injector,
    2020-08-06

    Case study A failed CAT C7 injector, using SD-4000 to check its solenoid, the results are clear and straightforward, as following

  • The trouble maker is a failed solenoid. Do we have any tool to detect such problems?
    2020-08-05

    SD-4000 Solenoid Diagnoser is an innovative instrument to diagnose engine solenoids and piezo actuators, such as those on injectors and pumps, on-site of a faulty vehicle. Currently a multimeter was used to measure resistance for a problematic solenoid. Since solenoid coil resistance is very close t

  • VE Pump Rotor Head and Inside Parts From FOTMA
    2020-07-31

    VE Pump Rotor Head and Inside Parts From FOTMA

  • Fuel Injection System Mechanical Fuel Pump
    2020-07-23

    Mechanical Fuel Pump Fuel Pump A fuel pump is a frequently (but not always) essential component on a car or other internal combustion engined device. Many engines (older motorcycle engines in particular) do not require any fuel pump at all, requiring only gravity to feed fuel from the fuel tank t

  • Mechanical Fuel Injection
    2020-07-21

    Mechanical fuel injection Basic Concept of Mechanical Injection All forms of fuel injection (FI) are designed to achieve the delivery of a correct fuel/air mix into an internal combustion engine for the most fuel efficient burn. All forms of fuel injection do so by forcing the fuel under pre

  • Fuel Tank and Fuel Line Repairs
    2020-07-16

    Fuel Tank and Fuel Line RepairsA fuel tank is simply a reservoir for your car's fuel. Fuel tanks typically hold from 10 to 20 gallons of fuel, depending on the car's fuel efficiency. (My 40-year-old Continental has a 25-gallon fuel tank, accurately suggesting a low number of miles to the gallon. My

  • High Quality Fuel System Repairs Guide
    2020-07-14

    High Quality Fuel System Repairs Guide Where would your car be without a fuel system? Stranded! And so would you. Before you find yourself in this situation, you might want to learn how repairs are done to an automotive fuel system. If not, at least read this Section before you hire a mechanic to d

  • Electric Fuel Pump Device
    2020-07-09

    Electric Fuel Pump DeviceElectric pump In many modern cars the fuel pump is usually electric and located inside of the fuel tank. The pump creates positive pressure in the fuel lines, pushing the gasoline to the engine. The higher gasoline pressure raises the boiling point. Placing the pump in th

  • What's Diesel Fuel Injection Unit Injector and Its Application
    2020-07-07

    Unit Injector Unit Injector (abbrev. UI) is a diesel engine fuel injection system, combining the injection pump and the injector nozzle in a single component, which is (usually) driven by the engine camshaft. History Unit Injector systems were commonly associated as Detroit Diesel Allison fuel s

  • FOTMA Supply Governors Test Bench Applicate for Woodward governors
    2020-07-02

    FOTMA Supply Governors Test Bench Applicate for Woodward governors

  • FOTMA Supply High Quality Fuel Injection Parts nozzle/plunger/valve/kits
    2020-06-30

    FOTMA Supply High Quality Fuel Injection Parts nozzle/plunger/valve/kits

  • FOTMA Made High Quality Fuel Parts EUP EUI Valve
    2020-06-17

    FOTMA Made High Quality Fuel Parts EUP EUI Valve

  • Total 6 pages  Go to Page
  • Go
QUESTION? LET US HELP.
Simple choose a support option from the icons below:
FOLLOW US ON:

Copyright © Hubei Fotma Machinery Co.,Ltd   Powered by FOTMA