CRS-5000 is a cost-effective, modular designed equipment to test all kinds of diesel common rail fuel injection systems. Features:CR Injector Drivers:● 6 solenoid injectors ■ High voltage for Bosch, Denso injectors ■ Low voltage for Delphi injectors● 6 piezoelectric injectors, made by Siemens and Bo

The primary pump (1) supplies fuel to a high-pressure reservoir, the fuel rail (2), where the fuel is stored at the optimal pressure for the engine's instantaneous operating conditions in preparation for subsequent injection. Each of the engine's cylinders is equipped with an injector (4) feat

Unit pump The Unit Pump system is a modular high-pressure diesel injection system, which is closely related to the Unit Injector system (UI), and is designed for use in commercial vehicle diesel engines. Both systems use an individual injection pump, driven by an extra camshaft lobe for each

HEUI Injectors Function: 1. Measurement fuel delivery of four HEUI injectors 2. Sealing test for injector upper seat of the solenoid control valve 3. Can test 4pcs injectors at same time. Specification: 1. AC Power: 3-Phase, 5kw, 380V/50Hz or 230V/60Hz or 460V/60Hz 2. Drive System for Actuation Pump

The T444E is a Diesel V8 engine manufactured by Navistar International Corporation. It was used by Ford Motor Company, branded the Ford Power Stroke engine, from 1994 through 2003, replacing an earlier 7.3 L indirect-injection V8 from Navistar. It was replaced in 2003.5 (After December 31st 2002)

New Design for Common Rail System Test Bench, Remote Control

HUP-100 High Pressure Oil Pump Tester is an add-on equipment to test high pressure oil pump (HPOP) on CAT HEUI engines. The HPOP pump is driven by a traditional diesel high pressure pump test bench. HUP-100 provides oil supply, controls the oil actuation pressure from the HPOP pump, and measur

FM-3000S Common Rail System Test Bench, WINDOWS operation system, LCD screen, oil measure digital display, support BOSCH, DELPHI, DENSO system, with Bosch date base for testing reference, cleaning nozzle. FM-3000S can do with flow sensor system, or weight measure system. Also can do 2, 4, 6, 8, 12

Bosch common rail oil pump CP4 Parameter CP4 characteristic parameters:1) One or two plunger unit types (V90);2) Internally supported radial piston pump;3) Diversified cams and roller bodies;4) Aluminum pump body (without high-pressure guide);5) Stainless steel head with integrated high pressure val

Bosch common rail oil pump CP4CP4 is Bosch's latest generation high-pressure common rail oil pump. At present, CP4 has been mass-produced in the European market, and Jiangling's family has also started trial matching in the Chinese market. CP4 is mainly used in some high-end diesel cars, such as Aud

How to disassemble the high pressure common rail oil pump1) Remove the connection circuit between the electronic injection engine control unit zdECU and each sensor and actuator version.2) Remove the air filter.3) Remove the right ground wire from the battery.4) Turn the heater switch to the "heatin

Fuel injection pressure is an important indicator of diesel enginesFuel injection pressure is an important indicator of diesel engines because it is related to engine power, fuel consumption, emissions, etc. The common rail diesel injection system has increased the fuel injection pressure to 1800 ba